Concept

The baryonic Tully–Fisher relation — where it appears

The relation between a disc galaxy's total baryonic mass and the fourth power of its flat rotation speed. It is tighter than the luminosity version because the gas is counted, and its small scatter is a constraint on how much freedom a rotation-curve decomposition really has.

Named by 5 essays across one field — each of them below, with the objects they name alongside it.

Tully–Fisher, from two assumptions and no fitting. 44 model galaxies spanning two and a half decades in luminosity, each built from a constant disc surface brightness of 380 L☉ per square parsec with 0.13 dex of scatter and a stellar mass-to-light ratio of 1.4 with 0.1 dex. Nothing about a luminosity–speed relation is put in: the scale length follows from the surface brightness, the mass from the light, and the speed from v² = GM/R. The construction makes L ∝ v⁴ exactly, so the true slope is −10.0 magnitudes per decade of speed. Least squares of magnitude on log speed returns -8.45, and the reverse regression -9.15: the scatter here is scatter in the speed at fixed luminosity, and error in the abscissa flattens a fitted slope, so neither fit returns the value the family was built with and the distance between them is the size of the effect. Residual scatter about the drawn line is 0.54 magnitudes. Observed slopes run from about −7.5 in blue light to −10 in the near infrared, where the mass-to-light ratio is steadiest — which is the same statement as the second assumption above.

A line width that is a distance

The width of a galaxy's hydrogen line depends on how fast it rotates, which depends on its mass, which is tied to its luminosity — so a quantity no distance enters gives an absolute brightness, and the distance follows from the brightness that is seen.

galaxies · Tully–Fisher
Three mass models, 2.3× apart in the disc, agreeing to 3.1 km/s everywhere. NGC 3198's rotation curve, decomposed three ways. The stellar disc has been scaled by 0.2, 0.65, 1.1 times its photometric mass, and for each scaling the halo's asymptotic speed and core radius have been fitted — not chosen — to reproduce the same total. The heavy curve and the marked points are that total: the three models agree with it to 3.08 km/s at every radius, well inside a measurement error of 4.5. The light curves below are the disc's own contribution, and at 17 kpc they differ by a factor of 2.3 — from 36 to 85 km/s — with the halo taking up exactly the slack, 126 down to 97. The curve is one function and the decomposition asks for two. The free parameter is the mass-to-light ratio of the stars, which the kinematics never measures, and it is why a "maximum disc" fit and a halo-dominated fit are both published for the same galaxy. The degeneracy does have one hard edge: scaling the disc to 1.35 times its photometric mass cannot be fitted by any halo in the family — the best leaves 5.6 km/s rms — because past the maximum-disc solution the stars alone already overshoot the curve and a halo cannot have negative mass. That is the one thing a rotation curve says about M/L on its own, and it is an upper limit. What separates the rest has to come from somewhere else: the vertical velocity dispersion of the disc, which weighs the stars alone; gas-rich dwarfs where there is scarcely a disc to argue about; or the baryonic Tully–Fisher relation, which ties the halo's speed to the baryons and would be a coincidence if the two were independent.

The same curve, two galaxies

A rotation curve is one function of radius. Decomposing it asks for two — how much of the speed is the stars and how much is the halo — and the mass-to-light ratio that trades one against the other is not measured by anything in the kinematics. A maximum disc and a halo-dominated fit run through identical points.

galaxies · Rotation curves
Three mass models, one rotation curve. Rotation curves for three decompositions of the same galaxy, from a disc contributing 30 per cent of the outer rotation to one contributing 95. Each is the quadrature sum of a stellar disc, whose shape is fixed by the light distribution and whose amplitude is an unknown mass-to-light ratio, and a dark halo with parameters of its own. All three reproduce the same flat outer rotation, because the halo's amplitude is adjusted to make up whatever the disc does not supply. They differ in the inner few kiloparsecs, by 27 kilometres a second here — which is more than the measurement error and less than the uncertainty in the disc's own contribution, since that depends on a mass-to-light ratio nobody measures directly. The maximum-disc assumption picks the largest disc consistent with the data, and it is a convention rather than a result.

Three mass models that fit the same curve

A rotation curve is one function of radius and it is fitted with three components, only one of which is known. The stellar disc's contribution scales with a mass-to-light ratio nobody measures, and whatever the disc does not supply the dark halo does — so a family of models reproduces the same curve exactly, and choosing among them is a convention rather than a measurement.

galaxies · Dark matter
Five speeds from the same galaxies, and the relation each one gives. The exponent and the scatter of the baryonic Tully–Fisher relation fitted to the same 90 model galaxies with five different speeds, fitted as speed on mass. outer speed: exponent 3.98, scatter 0.080 dex in mass; peak speed: exponent 3.86, scatter 0.110 dex in mass; at 2.2 scale lengths: exponent 3.29, scatter 0.167 dex in mass; W50 ÷ 2: exponent 3.73, scatter 0.119 dex in mass; W20 ÷ 2: exponent 4.05, scatter 0.118 dex in mass. The galaxies were built with the relation in their outer halo speed, and the other four speeds each lose some of it: the ones read from the inner curve inherit how concentrated each galaxy's stars are, and the line widths add the turbulence of the gas, which matters most in the slowest galaxies.

The speed a line width stands in for

A galaxy does not have a rotation speed. It has a rotation curve, rising in the smallest galaxies and peaking early in the largest, and the Tully–Fisher relation is fitted to whichever single number is read off it. Build galaxies with the relation placed in their outer speed and read four other speeds from the same curves, and each gives a shallower or looser relation — which is why the choice of speed is a statement about where the relation lives.

galaxies · Tully–Fisher
How the scatter depends on how much dispersion is added to rotation. The scatter of the baryonic Tully–Fisher relation, in dex of mass, when the same 80 turbulent model discs are measured with S = √(K Vᵣₒₜ² + σ²), against the weight K given to the rotation, for rotation measured at 1 and 2.2 disc scale lengths. Measured at 1 scale length the scatter is smallest, 0.076 dex, at K = 0.55, and is 0.076 dex at K = 0.5; measured at 2.2 scale lengths the scatter is smallest, 0.077 dex, at K = 0.23, and is 0.134 dex at K = 0.5. For an exponential disc with constant dispersion the pressure correction is exactly K = one over twice the radius in scale lengths, so the best weight depends on where the rotation is measured. The widely used K = 0.5 is the value that makes a pure rotator and a pure isothermal sphere of the same mass agree; it is also the pressure correction for rotation measured at one scale length, and not at any other.

A disc that turns slower than its mass requires

The star-forming discs of ten billion years ago were not the thin, cold, orderly discs of today. Their gas moved randomly at tens of kilometres a second, and that motion is a pressure that holds up part of each disc, so it turns more slowly than its mass alone would require. Read those rotation speeds as if rotation did all the work and the Tully–Fisher relation tilts and scatters as if galaxies had evolved, when what differs is how much of their weight is carried by disorder.

galaxies · Tully–Fisher

Named alongside it

The objects these essays reach for when they reach for this one.

Mass-to-light ratioRotation curveTully fisher relationVelocity dispersionDark matterDegeneracyThe disc–halo degeneracyLine widthMaximum discStellar population synthesisAsymmetric driftThe core–cusp problem

All concepts