Astronomy & Celestial Mechanics
the sky, computed
Concept

Line of sight structure — where it appears

Matter between the observer and a source that affects the measurement without being part of what is being measured. In lensing it adds convergence that no image configuration can detect, and it is estimated statistically from galaxy counts rather than measured.

Named by 3 essays across one field — each of them below, with the objects they name alongside it.

A delay of 81 days, and a sheet nobody can see that moves H₀ to 82.4. Above: the arrival-time surface of a lensed source, along the line through the lens. The curve is the Fermat potential in days — the geometric cost of taking a longer path, minus the gravitational cost of climbing out of the potential — and the images sit at its stationary points, at -1.20″ and 2.04″, which for an isothermal sphere is β ± θ_E. Fermat's principle is doing all of the work here: light does not take the shortest path or the quickest one, it takes every stationary one, and the number of images is the number of stationary points. The vertical distance between the two is 81 days, and it is measurable — the source is a quasar, quasars vary, and the same wiggle appears in one image and then the other. That single number carries an absolute distance: the delay is D_Δt/c times a dimensionless function of the lens model, and D_Δt goes as 1/H₀, so a monitoring campaign gives the Hubble constant with no calibrated distance beneath it. Below: the two light curves, shifted by exactly that delay. The dashed curve is the second image with the delay removed, and the agreement is the measurement. What the picture also shows is the reason the answer keeps moving. The second arrival-time curve is the same lens with a uniform sheet of convergence added and the source moved to compensate: every image sits at the same place, every flux ratio is the same, every image shape is the same, and the delay is λ = 0.85 times as long. A lens model fitted to positions alone cannot see the sheet, and inferring H₀ from the same delay under it gives 82.4 instead of 70 — a 15 per cent shift with no observable attached. Breaking it needs a mass measured some other way: the velocity dispersion of the deflector, or a count of everything else along the line of sight.

A distance measured with a stopwatch

The images of a lensed quasar sit at the stationary points of an arrival-time surface, and the height between two of them is a delay in days. That delay is proportional to a distance, and the distance is proportional to one over the Hubble constant — so a flickering quasar gives H₀ with no calibrated distance under it.

galaxies · Strong lensing A sheet of mass that changes 32 km/s/Mpc and no image. The mass-sheet degeneracy, drawn as what it does and does not change. Adding a uniform sheet of convergence and rescaling the unobservable source position leaves every image position relative to the lens, every image shape and every flux ratio exactly as it was — the transformation is an exact symmetry of the lens equation, not an approximation. What it does change is the time delay between images, in proportion, so a Hubble constant inferred from a measured delay is multiplied by the inverse of the rescaling. Across the range of sheets that a plausible line of sight can supply, the inferred Hubble constant moves by 32 kilometres a second per megaparsec — which is larger than the disagreement between the early and late measurements the technique is meant to arbitrate. Nothing in the lensing data can fix it; the constraint has to come from the lens galaxy's stellar kinematics or from the environment along the line of sight.

A sheet of mass that changes nothing but the answer

A gravitational lens's images are unchanged by adding a uniform sheet of matter and rescaling the source. Every position, every shape and every flux ratio stays exactly as it was; only the time delays change, in proportion. So a Hubble constant measured from a delay is multiplied by a number the lensing itself cannot determine.

galaxies · Strong lensing How far a sample of lenses can take the Hubble constant. The fractional uncertainty in H₀ from a sample of N lenses, both axes logarithmic: the independent errors of each lens — 2 per cent from its delay, 3 from the rest of its lens model, 2.5 from its line of sight and its own mass sheet as well as its kinematics fix it — fall as 1/√N; the shared errors — 1 per cent from the calibration of the line of sight, and the orbital bias of the previous figure — do not. With one aperture dispersion per lens the independent error is 10.1 per cent per lens and the floor 1.6 per cent, reached at about 42 lenses; with six resolved rings per lens, 5.9 and 1.1 per cent, reached at about 29. Dotted: the two floors. A sample that adds lenses without changing how each is measured stops improving at its floor; the resolved kinematics lower both the slope's starting point and the floor.

A hundred lenses and one assumption

A time-delay lens gives the Hubble constant to five or ten per cent, and the hope is that a hundred give it to one. The errors that differ from lens to lens — its delay, its own line of sight, its own internal sheet — do average away. The errors every lens shares because every lens was analysed the same way do not, and they set a floor that a sample reaches after a few dozen lenses and never goes beneath.

galaxies · Strong lensing

Named alongside it

The objects these essays reach for when they reach for this one.

Hubble constantThe mass-sheet degeneracyTime-delayConvergenceLens modelStellar kinematicsEinstein radiusExact degeneracyExternal convergenceFermat-potentialHubble tensionOrbital anisotropy

All concepts